Epoxy Heat Shrink Sleeve and Heat Shrinkable Pipe Sleeves Manufacturer In India
Heat Shrink Sleeve
A sleeve is a structure, which encompasses a pipe to make it stable and rigid. A Heat Shrink Sleeve is a protective covering for pipelines. These sleeves radically shrink when they are exposed to heat. They are available in a wide range of material types to suit different applications. The Heat Shrink Cable Sleeve provides excellent protection against abrasion, cutting, scuffing, and impact situations. This allows these sleeves to be used in applications where they are exposed to moisture, dust, and chemicals. The Heat Shrink Tube Sleeve is widely used around the world due to its superior tolerances. These cost-effective components can be easily installed and are highly reliable. We are amongst a few Heat Shrink Sleeve Manufacturers In India who manufacture all our products by following all international and national standards set by different unions. Our institution aims at providing the best products at the most reasonable rates.
The Heat Shrinkable Sleeves, when heated, stick to the material which it surrounds. The sleeve is made with a polyethylene sheet on the exterior, which is cross-linkable. The adhesive material easily sticks to the material creating a protective coat. The Heat Shrink Braided Sleeving is produced with an open weave construction. These sleeves protect these components from sharp and rough edges. They are very lightweight and flexible in their operation.
An Epoxy Heat Shrink Sleeve protects the surface and strengthens the material they encompass. These sleeves have a superior water, oil, and acid-resistant seal in the system. These components shrink properly at a temperature of 125 degrees C. We are amongst an elite category of Heat Shrink Sleeve Suppliers In India who can custom design all our products in different shapes and sizes as per your requirements. To get more details about our products and their pricing contact us for more information.
Buy Heat Shrink Cable Sleeve & Heat Shrink Braided Sleeving at factory price in Mumbai
Heat Shrink Sleeve Specification
| Schedule | Sch 10, Sch 20, Sch30, Sch40, Sch STD, Sch 60, Sch XS, Sch80, Sch100, Sch120, Sch140, Sch160, Sch XXS, UPTO 100MM |
| Pipeline Diameter Size Provided By Manufacturer | From 108mm to 1554mm |
| How to order? | |
| Width | 100mm to 450mm |
| Operate Temperature | 50ºC-80ºC |
| Export to | Indonesia, Colombia, Qatar, Kenya, Iran, United States (USA), United Arab Emirates (UAE), France, Saudi Arabia (KSA), Italy, Oman, Netherlands, Singapore, South Africa, Greece, Kuwait, South Korea, Brazil, Bangladesh, Myanmar (Burma), Nigeria, Belgium, Egypt, Poland, Mexico, Iraq Vietnam, Japan, Australia, Romania, United Kingdom (UK), Pakistan, Taiwan, Jordan, Nepal, Germany, Malaysia, Philippines, Turkey, Sri Lanka, Thailand, Hong Kong, Canada, Spain, Chile, China |
|---|---|
| Standard | |
| Testing Provided By Manufacturer | H2 SERVICE, NACE TM0177, NACE TM0284, SSC TEST, NACE MR0175, HIC TEST, IBR, etc. |
What Is Heat Shrinkable Sleeve?
Heat-shrinkable sleeves are corrosion protective coating for pipelines in form of wraparound or tubular sleeve. They’re easy to install, provide excellent protection, and are cost-effective
Heat Shrink Sleeve Size Chart
|
AWG Gauge Wire Size |
Diameter of Bare Wire |
Common Heat Shrink Size (inches) |
|
10 |
0.1019 |
.184 |
|
12 |
0.0808 |
.157 |
|
14 |
0.0641 |
.138 |
|
16 |
0.0508 |
.092 |
|
18 |
0.0403 |
.08 |
|
20 |
0.032 |
.07 |
Price List of Heat Shrink Sleeve
| Products | Price |
| Field Joint Cross-Linked Heat Shrink Sleeving | $10 Per Piece |
| 3lpe Coating Pipeline Heat Shrinkable Sleeve | $15 Per Piece |
| Heat Shrinkable Tube Cable Sleeve | $0.4 Per Meter |
| Heat Shrinkable Plastic Cable Sleeving | $1.5 Per Piece |
Heat Shrink Sleeves stockists, manufacturer, suppliers, dealers, exporters, stockholders and distributors prefer to buy from RELI ENGINEERING at the best price of Epoxy Heat Shrink Sleeves in India, View our stocklist to purchase Heat Shrink Braided Sleeving.
Ask for free sample, EIL approved Large Diameter Heat Shrink Sleeve and Heat Shrinkable Repair Sleeve supplier in India
Layers of Heat Shrink Sleeve Material
| Construction | Three Layer System |
| First Layer | Two-component, solvent-free Liquid epoxy |
| Second Layer | High shear strength, Hot-melt copolymer adhesive |
| Third Layer | Radiation cross-linked, high density polyethylene with Shrink Indicator pattern. |
Technical Information of Heat Shrink Braided Sleeve
| Application guide | HBPE60 | HBPE80 |
| Standard Reference | EN 12068 Class C 60 UV | EN 12068 Class C 80 UV |
| Compatible line coatings | PE/FBE/DFBE/CTE | PE/FBE/DFBE/CTE |
| Soil stress restriction | None | None |
| Max operating temperature | 65ºC | 85ºC |
| Preheat temperature | 70 - 80ºC | 70 - 80ºC |
| Recommended pipe preparation | SA 21/2 | SA 21/2 |
Features of Fep Heat Shrink Tube Sleeve
- Excellent multi-functional adhesive that allows lower installation in pre-heat temperature and bonding to 3LPE/DFBE/FBE/CTE
- Full resistance to shear forces induced by soil and thermal movements.
- Superior cathodic disbondment, hot water immersion resistance and Thermal ageing resistance that offers the optimum barrier long term protection against corrosion.
- Reduction in time and cost by lower pre-heat temperature, wet epoxy primer application.
Product Thickness of Epoxy Heat Shrink Sleeve
| Backing(as supplied) | Adhesive(as supplied) | Total thickness(recovered) |
| 0.9 | 1 | 2.2 |
| 1 | 1.1 | 2.4 |
| 1 | 1.3 | 2.6 |
| 1.2 | 1.4 | 3 |
| 1.2 | 1.6 | 3.2 |
| 1.5 | 1.5 | 3.5 |
Operating Characteristics of Heat Shrink Zipper Sleeve
| Sleeve Operating Characteristics | Test Method | Test Result | |
| Pipeline Operating Temp. | Up to 80°C | ||
| Minimum Installation Temp. | 110°C (140°F) | ||
| Mainline Coating Compatibility | PE, FBE |
Heat Shrinkable Rubber Sleeve Adhesive Properties
| Softening Point | ASTM E28 | 125°C | |
| Lap Shear @ 23°C | DIN 30672 | 372 N/cm2 |
Types of Heat Shrink Sleeve
Heat Shrink Pipe Sleeve
Heat Shrink Cable Sleeve
Heat Shrink Tube Sleeve
Heat Shrink Braided Sleeving
Heat Shrink Sleeve 5mm
Heat Shrink Sleeve Coating
Epoxy Heat Shrink Sleeve
Heat Shrink Grip Sleeves
Heat Shrink Zipper Sleeve
3.5mm Heat Shrink Sleeve
Large Heat Shrink Sleeve
Large Diameter Heat Shrink Sleeve
Adhesive Lined Heat Shrink Sleeve
Fiber Optic Heat Shrink Sleeve
Heat Shrink Sleeve Pipeline
Heat Shrink Repair Sleeve
Heat Shrink Rubber Sleeve
Heat Shrinkable Rubber Sleeve
Get a Free quote of Heat Shrink Tube Sleeve ex Mumbai, we stock Heat Shrink Sleeves 5mm, Heat Shrink Zipper Sleeve in India
Heat Shrink Grip Sleeves Hs Code
| Hs Code | 3917 |
Use Of Heat Shrinkable Rubber Sleeve
- Potable & Waste Water
- Jet Fuel transfer
- Fire Water & Salt Water piping
- Offshore water injection line
- Water injection line
- Water supply pipeline
- Tubular material collection
- Gas application
- Transport formation water
Manufacturer in India nad supply Heat Shrinkable Sleeve in below Countries
| Slide Sleeves Rubber Flexible Joint | Chile, Iran, Canada, Philippines |
| Heat Shrink sleeves 16MM Tube | United Arab Emirates (UAE), Norway, Romania, Europe |
| 3X Heat Shrinking Sleeve For Cable Heat Shrink tubing | Netherlands, Russia, Malaysia, Sweden |
| black 150 mm Heat Shrinkable sleeves Wrap for Pipe Bends | Egypt, Mexico, Los Alamos -Mexico, Malaysia |
| Polyolefin Shrink sleeves black Insulation 8mm Heat Shrink Tube | United Kingdom -UK, Malaysia, NY 12203 (USA), Singapore |
| fep heat shrink tube Sleeving | UK, Poland, Philippines, Dammam -KSA |
| Heat Shrink Braided Sleeve | Singapore, Malaysia, Europe, Qatar |
| heat shrink sleeve material | Malaysia, Japan, Thailand, Czechia |
| adhesive heat shrink sleeve | China, Colombia, Bangladesh, Malaysia |
| adhesive lined heat shrink sleeve | Philippines, Taiwan, Kuwait, South Africa |
| braided heat shrink Sleeving | Malaysia, South Korea, Singapore, Bahrain |
| bottle neck heat shrink sleeve | Belgium, Indonesia, UK, Philippines |
| cable heat shrink sleeve | Thailand, France, Hong Kong, Oman |
| epoxy heat shrink Sleeving | Malaysia, Germany, Turkey, Malaysia |
| fiber optic heat shrink sleeve | Finland, USA, Malaysia, Dubai |
| flexible heat shrink sleeve | Brazil, Saudi Arabia (KSA), Spain, UK |
| fiber heat shrink sleeve | Singapore, South Africa, Europe, UAE |
| heat shrink sleeves for pipeline | Nigeria, Australia, Canada, Ellington -United States |
| heat shrink sleeves field joint coating | UAE, Malaysia, Italy, Singapore |
Heat Shrink Sleeve Coating physical Properties
| Tensile Strength | ASTM D638 | 24 MPa | |
| Elongation | ASTM D638 | 600% | |
| Hardness | ASTM D2240 | 55 Shore D | |
| Volume Resistivity | ASTM D257 | 1017 ohm-cm |
You can compare our price with other Heat Shrink Sleeve Suppliers In India, Check Heat Shrink Rubber Sleeve Thickness and Types Of Heat Shrinkable Sleeves Online
Properties of Heat Shrink Repair Sleeve
| Adhesion Strength @ 23°C | DIN 30672 | 60 N/cm | |
| Impact Resistance | EN 12068 | Pass | |
| Indentation Resistance | EN 12068 | Pass | |
| Cathodic Disbondment @ 23ºC,
28 days with epoxy |
EN 12068 | 3 mm rad | |
| Cathodic Disbondment @ 23ºC,
28 days without epoxy |
EN 12068 | 13mm rad | |
| Low Temp. Flexibility | ASTM D2671-C | -32°C |
Oil Resistant Elastomeric Heat Shrinkable Tubing
| Cross-linked specially formulated elastomeric compounds. | Operating temperature: -75~150 ºC |
| Flexible, flame-retardant | Shrink temperature:150 ºC |
| Excellent resistance to oil, diesel and hydraulic fluids. | Shrink Ratio:2:1 |