Di Pipe Repair Sleeve and Ductile Iron Sleeve Manufacturer in India
Ductile Iron Pipe Sleeve
Ductile iron is produced in a blast furnace by smelting ore to form a strong product. A Ductile Iron Pipe Sleeve is made with a composition of carbon, silicon, and manganese. These sleeves possess superior strength enabling them to provide excellent stability and support the pipe enclosed within them. The Di Pipe Sleeve has excellent tensile strength along with superior elongation properties. These sleeves possess good corrosion resistance if they are alloyed with appropriate alloys suitable in different environments. Ductile Iron Wall Sleeve acts as a sealant and prevents moisture leakage from the walls. These wall sleeves possess a high elastic limit with enhanced impact resistance. We are the Ductile Iron Pipe Sleeve Manufacturers In India who subject our products through vigorous testing and screening procedures to eliminate any defect within them. Our top-quality products are available to all our consumers at the most feasible rates.
Pipes are prone to leakage due to wear and corrosion. The Ductile Iron Pipe Repair Sleeve acts as a sealant in such applications, preventing any leakage, and stopping corrosion from spreading through the pipeline. These sleeves are compatible with different types of pipes in different systems. Ductile Iron Cylinder Sleeves are installed to repair or protect a damaged cylinder bore. Installation of this sleeve prevents any repair cost and lengthy downtime. They can be availed in a wide range of dimensions and sizes to meet the requirements of all our consumers.
The Ductile Iron Solid Sleeve is used in connecting different optical modules replacing fiber stubs as connection elements. Our experience workers manufacture all our products from the best raw materials and the latest technology. This is done following all international and national standards set by different unions. If you have any queries about our product range contact or visit us for more.
Check available sizes of Ductile Iron Pipe Repair Sleeve and Di Tapping Sleeve in our online inventory
We manufacture Ductile Iron Pipe Sleeve in custom sizes & material to repair leak in pipe. If the leak is in a pipe, remove the leaking section and replace it with a new section using same material Ductile Iron Pipe Sleeve. We export large quantities of Carbon Steel Ductile Iron Sleeve to the Canada, Melbourne, Perth, Houston, Philippines, Russia, Kazakhstan, Uzbekistan, Kyrgyzstan, Sydney, UK, Cape Town, Ireland, Australia, South Africa, NZ, Dubai, UAE, Brisbane, Singapore, Gauteng, Adelaide, Qatar, Saudi Arabia etc.
Ductile Iron Pipe Sleeve Specification
Are you looking for Ductile Iron Pipe Sleeve manufacturers in India? Manufacturer of Ductile Iron Pipe Sleeve in Mumbai, we provide the highest quality Ductile Iron Sleeve & Ductile Iron Pipe Solid Sleeve in the industry at Pipeline Repairs.
| Specification | ASTM A377 Ductile Iron, AASHTO M64 Cast Iron Culvert Pipe |
| Main Products | Di, Dci, Pipe, Ductile Cast Iron Pipe, Dci Pipe, Di Pipe |
| Material | Ductile Iron GGG 50 |
| Standard | ISO2531, EN545, EN598 |
| Class of Pipe | C20, C30, C25, C40, C50, C64, C 100 & Class K7, K9 & K12 |
| Stainless Steel Rectangular Pipe | 10*30, 10*40, 10*50, 20*10, 23*11, 24*12, 25*13, 29*14, 28*25, 28*13, 30*15, 30*20, 30*22, 36*23, 50*25, 34*22, 60*30, 75*45, 95*45 mm |
| Standard Sizes | DN 80 mm to DN 2000 mm (including DN 125 & DN 750) |
| External Coating | Red / Blue Epoxy or Black Bitumen, Zn & Zn-AI Coatings, Metallic Zinc (130 gm/m2 or 200 gm/m2 or 400 gm/m2 as per the customer’s requirements) complying to relevant ISO, IS, BS EN standards with a finishing layer of Epoxy Coating / Black Bitumen(minimum thickness 70 micron) as per the customer’s requirements. |
| Available joint method | T type; Mechanical joint k type; Self-anchor |
| Internal Coating | Cement Lining of OPC/ SRC/ BFSC/ HAC Cement mortar lining as per requirement with ordinary Portland Cement and Sulphate Resisting Cement conforming to relevant IS, ISO, BS EN standards. |
| Application | Ductile cast iron Pipe are mainly used for transferring waste water, drinkable water and for irrigation. |
| Coating | Metallic zinc spray with Bituminous Coating (Outside) Cement mortar lining (Inside). |
| Test | Colour Coated Ductile Iron Pipe Sleeve with 100% Holiday Test |
| Coating Types |
|
| We supply in | Austria, Greece, Bogota, Sydney, Karnataka, Lebanon, Aberdeen, Jebel Ali, Bhopal, La Victoria, Algeria, Poland, Croatia, Costa Rica, Mongolia, Belarus, Vietnam, United States (USA), Port of Spain, Nagpur, Petaling, Bulgaria, Lithuania, Australia, Uttar Pradesh, Sila, Mumbai, United Kingdom, Denmark, London, Hungary, Mexico, Russia, Colombia, Nigeria, Toronto, Norway, Romania, Qatar, Switzerland, Peru, Jamshedpur, Saudi Arabia, Gabon, Slovakia, Egypt, Al Jubail, Bengaluru, Pune, Bhavnagar, Thailand, Bahrain, Vadodara, Surat, Bangalore, Queenstown, Seoul |
| How to order Ductile Iron Pipe Sleeve? |
|
| Why choose RELI ENGINEERING ? |
|
Ductile Iron Pipe Sleeve Areas of application
Ductile Iron Pipe Sleeve are used in Power plants, pipelines, Gas application, Potable & Waste Water, Jet Fuel transfer, oil platforms, refineries, chemical and industrial plants, and general mechanical engineering etc.
Types of Ductile Iron Pipe Sleeve
Ductile Iron Sleeve
Ductile Iron Pipe Solid Sleeve
Ductile Iron Pipe Repair Sleeve
Ductile Iron Steel Sleeves
Ductile Iron Pipe Wall Sleeve
Sleeve For Ductile Iron Pipe
Ductile Iron Tapping Sleeve
Ductile Iron Solid Sleeve
Ductile Iron Cylinder Sleeves
Ductile Iron Mechanical Joint Sleeve
Ductile Iron Pipe Tapping Sleeve
Polyethylene Sleeve Ductile Iron Pipe
Ductile Iron Wall Sleeve
Ductile Iron Sleeve Coupling
American Ductile Iron Tapping Sleeve
Ductile Iron Sleeve Sizes
Standard Sizes: 12” to 72”
We are manufacturer of Ductile Iron Pipe Sleeve in any size as per client's requirement.
DI Wall Sleeve Material
| Ductile Iron Pipe Sleeve | American Ductile Iron Tapping Sleeves |
| Ductile Iron Sleeves | Ductile Iron Cut In Sleeve |
| Ductile Iron Pipe Solid Sleeve | Ductile Iron Mechanical Joint Sleeve |
| DI Pipe Repair Sleeves | 8 Ductile Iron Pipe Sleeves |
| Ductile Iron Wall Sleeve | Ductile Iron Pipe Tapping Sleeves |
| DI Steel Sleeves | Polyethylene Sleeves Ductile Iron Pipe |
| Ductile Iron Pipe Wall Sleeves | 8 Ductile Iron Solid Sleeve |
| Sleeve For Ductile Iron Pipe | Mechanical Joint DI Solid Sleeves |
| Ductile Iron Sleeves Coupling | DI Sleeve Coupling |
| Ductile Iron Sleeve Installation | K9 ISO2531 EN545 ductile cast iron Pipe Wall Sleeves |
| Ductile Iron Sleeves Vs Steel | Ductile iron iso 2531 Pipe Solid Sleeves |
| Ductile Iron Tapping Sleeve | EN124 DI Pipe Repair Sleeves |
| Ductile Iron Solid Sleeve | ISO2531 DN1800 Ductile Iron Pipe Tapping Sleeves |
| Ductile Iron Cylinder Sleeves | DI Solid Sleeves |
Manufacturer & Supplier of DI Wall Sleeve and Ductile Iron Solid Sleeve in Mumbai, check Price list and dimensions
Ductile Iron Solid Sleeve Application
- DI Pipe Solid Sleeves are the most commonly used insulation.
- These Ductile Iron Pipe Repair Sleeve are the simplest, quickest & neatest method to extend pipe lengths.
- Ductile Iron Wall Sleeves cover and protect radiator pipes very easily.
- Ductile Iron Steel Sleeves are also used to 'sleeve' two pieces of un-swedged pipes together.
- DI Pipe Wall Sleeves used in central heating installations.
- Sleeves For Ductile Iron Pipe is ideal for all pipe carrying different forms of liquid, gas, oil, chemicals etc.
- Ductile Iron Sleeve Coupling meet all building regulations relating to fire rated walls.
- DI Tapping Sleeves offer fire protection for brick, block and plasterboard walls.
- Ductile Iron Solid Sleeves act as a protective sleeve in the form of a pressure relieving arch.
- DI Cylinder Sleeves help in the pipework to prevent corrosion.
- Clients, architects, mechanical engineers, and consultants can also ensure that each pipe is adequately sleeved in a very cost-effective manner.
Ductile Iron Pipe Sleeve price list
| Product | Price |
| Leak repair clamp/ ductile iron pipe sleeve for straight section of Ductile iron pipes | $ 331.00 / Sets |
| Ductile Iron Pipe Repair Clamp 1.6 Mpa with Rubber Sleeve pipe joint sleeve | $ 5.00-US$ 50.00 / Piece |
| Epoxy coated ductile iron cast iron pipe cutter repair Sleeves k9 tube | $ 550.00-US$ 650.00 / Metric Ton |
| Ductile iron pipe Sleeves size sleeve | $ 500.00-US$ 650.00 / Metric Ton |
| Ductile iron pipe with pe Sleeves | $ 600.00-US$ 1,000.00 / Ton |
| K9 ductile iron pipe with pe Sleeves | $ 950.00-US$ 1,300.00 / Ton |
| 50Mm Ductile Iron Pipe Fittings Flexible Sleeve | $ 0.25-US$ 5.00 / Piece |
| Di pipes with pe sleeving | $ 1.00-US$ 100.00 / Piece |
| Polyurethane coating ductile iron pipe sleeves | $ 10.00-US$ 10,000.00 / Meter |
| ISO2531 DN1800 socket and spigot ductile iron pipe Sleeves | $ 550.00-US$ 900.00 / Ton |
DI Pipe Sleeves Dimensions
| Size | D As supplied ID(mm) | After full recovery(mm) | Standard package | |||
| mm | inch | ID d | Wall thickness w1 | Thickness of adhesive
w2 |
(m/spool) | |
| Φ3.0(3.2) | 1/8 | ≥3.0 | ≤1.0 | ≥1.00 | 0.50 | 200 |
| Φ4.8 | 3/16 | ≥4.8 | ≤1.5 | ≥1.00 | 0.50 | 100 |
| Φ6.0(6.4) | 1/4 | ≥6.0 | ≤2.0 | ≥1.00 | 0.50 | 100 |
| Φ7.9 | 2.5/8 | ≥7.9 | ≤2.7 | ≥1.00 | 0.50 | 100 |
| Φ9.0(9.5) | 3/8 | ≥9.0 | ≤3.0 | ≥1.40 | 0.60 | 50 |
| Φ12.0(12.7) | 1/2 | ≥12.0 | ≤4.0 | ≥1.60 | 0.80 | 25 |
| Φ19.0(19.1) | 3/4 | ≥19.0 | ≤6.0 | ≥2.10 | 0.80 | 25 |
| Φ24.0(25.4) | 1 | ≥24.0 | ≤8.0 | ≥2.40 | 1.0 | 25 |
| Φ40.0(39.0) | 1-1/2 | ≥40.0 | ≤13.0 | ≥2.40 | 1.0 | 25 |
| Steel bar diameter(MM) | Outer diameter of coupler (MM) | Inner diameter of coupler(MM) | Length of coupler (MM) |
| 16MM | 24MM | 14.5MM | 40MM |
| 18MM | 27MM | 16.5MM | 45MM |
| 20MM | 29MM | 18.5MM | 50MM |
| 22MM | 32MM | 20.5MM | 55MM |
| 25MM | 37MM | 23MM | 60MM |
| 28MM | 41MM | 26MM | 65MM |
| 32MM | 47MM | 30MM | 70MM |
| 36MM | 53MM | 33MM | 78MM |
| 40MM | 59MM | 38MM | 86MM |
India's largest Manufacturer, Source, Stock, Distributor, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Fabricator & Stockist of Ductile Iron Pipe Sleeve in Mumbai.
Ask for free sample, PED approved Ductile Iron Cylinder Sleeves and DI Pipe Sleeve supplier in India, Check Updated price list Online
Ductile Iron Pipe Repair Sleeve Standards
| Coatings and Linings | Standards |
| Asphaltic | ANSI/AWWA C110/A21.10 |
| ANSI/AWWA C115/A21.15 | |
| ANSI/AWWA C151/A21.51 | |
| ANSI/AWWA C153/A21.53 | |
| Cement Lining | ANSI/AWWA C104/A21.4 |
| Fusion-Bonded Epoxy | ANSI/AWWA C116/A21.16 |
| Ceramic Epoxy Lining | PROTECTO 401 |
| ASTM A716/A746 | |
| Coal Tar Epoxy Lining | PROTECTO 401 |
| Polyethylene Encasement | ANSI/AWWA C105/A21.5 |
| ASTM A674 |
Dimensions of Ductile Iron Sleeve
| Ductile Iron Pipe Sleeve Size | Actual I.D. | Actual O.D. | Waterstop Height | Waterstop Thickness |
|---|---|---|---|---|
| 2 | 2.087" | 2.362" | 2" | 0.25" |
| 2.5 | 2.559" | 2.875" | 2" | 0.25" |
| 3 | 3.15" | 3.50" | 2" | 0.25" |
| 4 | 4.134" | 4.488" | 2" | 0.25" |
| 5 | 5.157" | 5.512" | 2" | 0.25" |
| 6 | 6.142" | 6.614" | 2" | 0.25" |
| 8 | 8.11" | 8.622" | 2" | 0.25" |
| 10 | 10.039" | 10.748" | 2" | 0.25" |
| 12 | 12.008" | 12.795" | 2" | 0.25" |
| 14 | 13.11" | 13.819" | 2" | 0.25" |
| 16 | 15.118" | 15.827" | 2" | 0.25" |
| 18 | 17.323" | 18.898" | 2" | 0.25" |
| 20 | 19.213" | 20.00" | 2" | 0.25" |
| 22 | 21.26" | 22.047" | 2" | 0.25" |
| 24 | 23.228" | 24.016" | 2" | 0.25" |
| 26 | 24.882" | 25.984" | 2" | 0.25" |
| 30 | 28.9" | 30.00" | 2" | 0.25" |
Properties of Ductile Iron Pipe Tapping Sleeve
| PHYSICAL AND MECHANICAL PROPERTIES | ASTM A536, GRADE 60-40-18 | ASTM A536, GRADE 80-55-06 | |
|---|---|---|---|
| Tensile Strength, min, psi | 60000 | 65000 | 80000 |
| Tensile Strength, min, MPa | 414 | 448 | 552 |
| Yield Strength, min, psi | 40000 | 45000 | 55000 |
| Yield Strength, min, MPa | 276 | 310 | 379 |
| Elongation in 2 in. or 50 mm, min % | 18 | 12 | 6 |
| Density lb/in3 | 0.256 | 0.256 | 0.256 |
| Melting Temperature (Degrees F) | 2,100 - 2,190 | 2,100 - 2,190 | 2,100 - 2,190 |
| Compressive Strength Ksi | 429 | 429 | 429 |
| UNS | F32800 | F33100 | F33800 |
Our regular consignments to following Places
| Di Pipe Tapping Sleeve | Russia, Colombia, Nigeria, Qatar |
| Mechanical Joint DI Solid Sleeves | Denmark, Tibet, India, Argentina |
| DI Solid Sleeve | Turkey, United Arab Emirates, Sweden, South Africa |
| DI Pipe Wall Sleeves | Zimbabwe, Venezuela, Pakistan, Philippines |
| 8 DI Solid Sleeves | Gabon, Slovakia, Egypt, United Kingdom |
| 8 Ductile Iron Pipe Sleeve | Greece, Mexico, Norway, Romania |
| Polyethylene Sleeve Ductile Iron Pipe | Switzerland, Peru, United States (USA), Saudi Arabia |
| Ductile Iron Tapping Sleeves | Brazil, Ghana, Spain, Bangladesh |
| Sleeve For DI Pipe | New Zealand, Macau, Canada, Yemen |
| Ductile Iron Sleeve Coupling | Czech Republic, Chile, Nigeria, Bolivia |
| DI Steel Sleeves | Chile, Europe, Puerto Rico |
| Ductile Iron Cut In Sleeve | Mongolia, Belarus, Vietnam, Bulgaria |
| Ductile Iron Cylinder Sleeves | Finland, Malaysia, Sri Lanka, France |
| American DI Tapping Sleeves | Poland, Croatia, Costa Rica |
| DI Mechanical Joint Sleeves | Lithuania, Australia, Hungary, Austria |
| DI Solid Sleeve | Lebanon, Thailand, Bahrain, Algeria |
Various sizes and thickness in stock, exporter and supplier of Ductile Iron Pipe Wall Sleeve in India, Buy Di Pipe Repair Sleeve at low price in Mumbai
DI Sleeve Coupling Main connecting dimension
| DN | RANGE(MM) | L(MM) | D(MM) | BOLT | |
| SIZE | QTY | ||||
| 50 | 59-72 | 102 | 165 | M12*180 | 2 |
| 65 | 72-85 | 102 | 185 | M12*180 | 2 |
| 80 | 88-103 | 102 | 185 | M12*180 | 4 |
| 100 | 109-128 | 102 | 218 | M12*180 | 4 |
| 125 | 132-146 | 102 | 250 | M12*180 | 4 |
| 150 | 159-182 | 102 | 272 | M12*200 | 4 |
| 200 | 218-235 | 130 | 335 | M12*220 | 4 |
| 250 | 272-289 | 130 | 405 | M12*220 | 6 |
| 300 | 315-332 | 130 | 460 | M12*220 | 6 |
| 350 | 340-360 | 150 | 455 | M12*250 | 6 |
| 400 | 400-429 | 150 | 580 | M12*250 | 8 |
| 450 | 455-472 | 150 | 665 | M12*260 | 8 |
| 500 | 500-532 | 150 | 690 | M12*260 | 10 |
| 550 | 555-572 | 150 | 715 | M12*260 | 10 |
| 600 | 600-630 | 150 | 790 | M12*260 | 10 |