Braided Ceramic Fiber Sleeve and Ceramic Pipe Sleeve Manufacturer In India
Ceramic Sleeve
Ceramic components are items, which are produced by mixing clay and earthen elements and then shaping them in appropriate sizes. A Ceramic Sleeve is a corrosion-resistant sleeve that can be used in harsh environments. These sleeves are hard and brittle thereby, providing excellent protection to the enclosed wires and pipes. The Ceramic Fiber Sleeve is made from alumina-silica fiber, which is reinforced via an organic carrier. These fibers possess enhanced stability and superior durability. The Braided Ceramic Fiber Sleeve has excellent tensile and yield strength along with excellent elongation properties. Its lower thermal conductivity makes it an ideal option in several hazardous applications. The nature of the engineering yarns provides the Ceramic Pipe Sleeve with excellent hardness and high-temperature resistance. These compounds have excellent thermal shock resistance with low heat storage.
A Ceramic Cylinder Sleeve is highly versatile and can be used in stress-induced environments. The liners placed within the cylinders will exhibit a sliding surface, which will help in optimizing the operation and enhancing its tolerances. These sleeves are available in a wide range of shapes and sizes. We are the Ceramic Sleeve Manufacturers In India who pride ourselves in providing the best products at the best rates in the markets. These products are quality assured as they are subjected to periodic checks and screening.
The Ceramic Split Sleeve is sturdy in nature, exhibiting a smooth finish. These lightweight components don’t put any additional pressure on the line. The modules are very reliable and posses a long service life. The Ceramic Candle Sleeve helps in improving the aesthetical appearance of the entire component. Our experienced workers make use of the best raw material and cutting-edge technology to manufacture the best products. If you have any questions or want to know in detail about our products, contact us or visit any of our stores.
Check available sizes of Ceramic Cylinder Sleeve and Ceramic Candle Sleeve in our online inventory
Ceramic sleeve lined Pipe are also knows as Ceramic sleeve or ceramic tube, these tube sintered as a whole part, and then assemble it into the steel pipe with our high strength temperature resistant epoxy adhesive. We manufacture Ceramic Pipe Sleeve in custom sizes & material to repair leak in pipe. These ceramic sleeve lined pipe has a smooth inner wall, excellent tightness as well as good wear and chemical resistance ability. If the leak is in a pipe, remove the leaking section and replace it with a new section using same material Ceramic Pipe Sleeve.
We export large quantities of Carbon Steel Ceramic Sleeve Lined Pipe to the Canada, Melbourne, Perth, Houston, Philippines, Russia, Kazakhstan, Uzbekistan, Kyrgyzstan, Sydney, UK, Cape Town, Ireland, Australia, South Africa, NZ, Dubai, UAE, Brisbane, Singapore, Gauteng, Adelaide, Qatar, Saudi Arabia etc.
What is Ceramic Pipe Sleeve?
These Ceramic Pipe Sleeve or ceramic sleeve sintered as a whole part, and then fixed it into the steel pipe with our high-strength-temperature-resistant epoxy adhesive. Recently 95% alumina ceramic sleeve lined pipes, elbows and T pipes have been largely applied in lithium battery material conveying system.. The main raw material of wear resistant ceramic ring is a special kind of ceramic with AL2O3 as the and the rare metal oxide as the flux, which is melted by high temperature at 1700 °C.
Ceramic Pipe Sleeves Areas of application
Ceramic Pipe Sleeves are used in Power plants, pipelines, Gas application, Potable & Waste Water, Jet Fuel transfer, oil platforms, refineries, chemical and industrial plants, and general mechanical engineering etc.
Ceramic Sleeve Specification
Are you looking for Ceramic Pipe Sleeve manufacturers in India ? Manufacturer of Ceramic Pipe Sleeve in Mumbai, we provide the highest quality Ceramic Sleeve Lined Pipe & Alumina Ceramic Sleeve Lined Straight Pipe in the industry at Pipeline Repairs.
Product name | Alumina Ceramic Lined Wear Resistant Bends, Ceramic sleeve lined piping, Abrasion Resistant Pipe Elbows |
Ceramic Pipe Sleeve Standard | BS, DIN, ASTM, API, GB, BS 1387, BS 1139, BS EN 39, BS EN10219, BS EN10217, DIN EN 10305, ASTM A106-2006, ASTM A53-2007, API 5CT, API 5L, GB/T3901 |
Abrasion Resistant Pipe Grade | A53-A369, 16Mn, 10#-45#, Q195-Q345, A53(A,B), A106(B,C), 16Mn, 10#, 20#, Q235, Q345, Q195, Q215 |
Ceramic Sleeve Lined Pipe Thickness | 1 - 20 mm |
Main Market | Lebanon, Thailand, Bahrain, Algeria, Poland, Croatia, Costa Rica, Mongolia, Belarus, Vietnam, Bulgaria, Lithuania, Australia, Hungary, Austria, Greece, Mexico, Norway, Romania, Russia, Colombia, Nigeria, Qatar, Switzerland, Peru, United States (USA), Saudi Arabia, Gabon, Slovakia, Egypt, United Kingdom, Denmark, Vadodara, Bhopal, La Victoria, Uttar Pradesh, Sila, Mumbai, London, Al Jubail, Bengaluru, Pune, Jamshedpur, Queenstown, Seoul, Aberdeen, Toronto, Karnataka, Jebel Ali, Bhavnagar, Surat, Bangalore, Port of Spain, Nagpur, Bogota, Sydney, Petaling |
Section Shape | Rectangular, Round |
High Quality Alumina Furnace Tubes Color | white, pink, red, Black |
AL 2O3 Alumina Ceramic Tube Material | Alumina Ceramic |
Shape |
|
Connection | by flange or welding |
Outer Diameter | 19*19mm---500*500mm |
Forming way | welding, lined |
AL2O3 | 92%,95% |
Finish | Sand blasting finished |
Usage | wear resistance |
Technique | ERW, Cold Rolled |
Temperature | less than 1700 centigrade (300-800°C) |
Certification | API |
Rockwell Hardness | 88HRA |
Ceramics Pipe Sleeves Surface Treatment By Manufacturer | Galvanized |
Special Pipe | Thick Wall Pipe |
Alloy Or Not | Non-alloy |
Secondary Or Not | Non-secondary |
Wear Resistant Alumina Ceramics Sleeves Lined Pipe Surface | black , oil , galvanized |
Ceramics Pipe Sleeves MTC | Offered together with shipping documents |
Length | 2.5m-12m |
Package | in bundle with steel strip,waterproof outside or as per your request |
MOQ | 5 tons |
High Abrasion Resistant Pipe Ends | plain |
Ceramics Pipe Sleeves Application | chemical, steel, cement, power plant, anti-wear/ wear protection, Industrial Ceramic |
Charater | Superior quality alumina powder |
Ceramics Pipe Sleeve Quality |
|
Temperature of Ceramic Cylinder Sleeve
- Paste: below 300°C
- Welding: below 600°C
- Dovetail: below 800°C
Technical Specifications of Ceramic Candle Sleeve
Item | Data | Characteristics of binder |
Density (g/cm3) | 1.32 | |
Compressive strength (MPa) | 40 | |
Shear Strength MPa | 26 | |
Impact toughness Kj/m2 | 10 | |
Hardness HB | 9.5 | |
Elastic Modulus GPa | 2.2 | |
Expansion coefficient 10-6/℃ | 20.1 | |
Softening temperature℃ | 263 | |
Coking temperature℃ | 335 | |
Acid resistance(24H) | Stability | Test solution : 15%H2SO4 |
Alkali resistance(24H) | Stability | Test solution: NaOH |
Ask for free sample, PED approved Ceramic Fiber Sleeve and Zirconia Ceramic Sleeve supplier in India
Technical index of wear-resistant Ceramic Fiber Sleeve
Item | Data | Note |
Ceramic Tube Al2O3 (%) | ≥95% | |
Ceramic Pipe Sleeve Density (g/cm3) | ≥3.65g/cm3 | |
Ceramic Tube Strength (MPa) | 1030 | |
Flexural strength (MPa) | 212 | |
Impact toughness (Kj/m2) | 10.2 | |
Ceramic Pipe Sleeve Hardness (HRV) | ≥85Mpa | |
Ceramic Tube Elastic modulus (GPa) | 304 | |
Expansion coefficient (10-6/℃) | 6.6 | |
Ceramic Pipe Sleeve Acid resistance(24H) | Stability | Test solution : 15%H2SO4 |
Ceramic Tube Alkali resistance(24H) | Stability | Test solution: NaOH |
Types of Ceramic Pipe Sleeve

Ceramic Sleeve Lined Pipe

Alumina Ceramic Sleeve Lined Straight Pipe

Alumina Ceramic Sleeve Lined Pipe With Flange

Alumina Ceramic Sleeves Lined Pipe Bend

Alumina Ceramic Sleeves Lined Pipe

Wear Abrasion Stainless Ceramic Pipes

Alumina Ceramic Lined Coal Pipes

99.7% Alumina Ceramic Tube

High Frequency Ceramic Pipe

85% Alumina Ceramic Tube

95% Alumina Tubes

Alumina Ceramic Sleeve Lined Pipe Bend

Ceramic Sleeve Lined Pipe With Flange

Wear-Resistant Ceramic Ring Composite Steel Pipe

High Quality Alumina Furnace Tubes
Ceramic Sleeve price list
Product | Price |
Wear resistant alumina Ceramics sleeve lined pipe | $ 550.00-US$ 850.00 / Ton |
Alumina Ceramics Lined Wear Resistant Bends/elbows, Alumina Lined Bends/elbow/tube/pipe | $ 100.00-US$ 285.00 / Piece |
92% Wear resistant alumina Ceramics lined coal steel pipe | $ 100.00 Per Meter |
Wear resistant alumina ceramic Sleeves lined pipe with PTFR coating | $ 700.00-US$ 900.00 / Piece |
Abrasion and impact resistant alumina Ceramics lined carbon steel pipe | $ 149.00-US$ 199.00 / Piece |
Alumina Ceramics Lined Wear Resistant Pipe/ Bend/ Elbow for super wear-resistant performance 92%/ 95%/ 99% Al2O3 | $ 100.00-US$ 1,000.00 / Piece |
High performance abrasion resistant alumina Ceramics lined pipe | $ 150.00 / Piece |
Lithium Industry 100% Ceramics lined pipe | $ 680.00-US$ 700.00 / Piece |
92 AL2O3 wear and corrosion resistant Ceramics lined bending pipe | $ 150.00 / Piece |
Wear impact abrasion protection alumina ceramic Sleeves lined pipe | $ 50.00-US$ 500.00 / Piece |
Lithium Industry 100% Ceramic lined pipe | $ 680.00-US$ 700.00 / Piece |
India's largest Manufacturer, Source, Stock, Distributor, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Fabricator & Stockist of Ceramic Pipe Sleeve in Mumbai.
Features of Ceramic Sleeve
- Abrasion and impact resistant ability
- Better purity for inside and outside pipe materials;
- More abrasive;
- Higher corrosion resistance;
- Stronger impacting resistance;
- Better high temperature resistance
- Smaller flatness of inside pipe (ceramic flatness≤0.5mm)
- High hardness
- Smooth surface
- Dimensional stability
- Saved maintenance time and expenditures
- Can be applied in all kinds of industrial abrasion
Get a Free quote of Ceramic Split Sleeve ex Mumbai, we stock Ceramic Coated Pump Sleeve, Ceramic Shaft Sleeve and Ceramic Anilox Sleeve in India
Ceramic Split Sleeve Applications
Ash Pipe & Elbows | Add-Mix Transport Lines | Coal Piping Clinker Chutes |
Chutes | Coal Conduit Lining | Coal Handing Chute Lining |
Fan Lining | Pulverizer Housing Liner | Coal Mill Pulverizer Cone Lining |
Bumer Feed Pipes | Classifer Cone Lining | Cullet Chutes & Hoppers |
Cyclone Lining | Downcomer Pipe Lining | Coal Mill Exhauster Lining |
Fan Housings | Drag Convey or Lining | Coal Mill Pulverizer Lining |
High Frequency Ceramic Pipe stock list
Ceramics Pipe Sleeve | High Quality Alumina Furnace Tubes |
Ceramic Sleeve Lined Pipe | 85% Alumina Ceramic Tube |
Alumina Ceramics Sleeve Lined Straight Pipe | 95% Alumina Tubes |
Alumina Ceramic Sleeve Lined Pipe Bend | Wear-resistant ceramic rings |
Alumina Ceramics Sleeves Lined Pipe Elbow | Wear-resistant ceramic ring |
Alumina Ceramics Sleeves Lined Pipe With Flange | AL 2O3 Alumina Ceramic Tube |
Ceramic Sleeve Lined Pipe With Flange | Abrasion Resistant Pipe |
Ceramics Sleeve Lined Reducer | Abrasion Resistant Pipe Elbows |
Alumina Ceramics Sleeves Lined Pipe | High Abrasion Resistant Pipe |
Alumina Ceramics Sleeves Lined Pipe Bend | Ceramic Split Sleeves |
Alumina Ceramic Sleeve Lined Pipe Australia | Alumina Ceramics Sleeves |
Ash Transportation Pip Bend Ceramic Lined | Titanium Sleeve Ceramics Head |
Ceramic Sleeve Lined Tee | Ceramics Head With Metal Sleeves |
Wear Abrasion Stainless Ceramic Pipes | Wear Resistant Alumina Ceramics Sleeves Lined Pipe |
Wear-Resistant Ceramics Ring Composite Steel Pipe | 99.7% Alumina Ceramic Tube |
Alumina Ceramics Lined Coal Pipes | High Frequency Ceramics Pipe |
Refer what and Where RELI ENGINEERING Supplies?
Titanium Sleeve Ceramic Head | Russia, Colombia, Nigeria, Qatar |
Ceramic Alignment Sleeve | Turkey, United Arab Emirates, Sweden, South Africa |
Ceramic Cylinder Sleeves | Poland, Croatia, Costa Rica |
Ceramic Bike Sleeve | Lebanon, Thailand, Bahrain, Algeria |
Ceramic Coated Shaft Sleeves | Czech Republic, Chile, Nigeria, Bolivia |
Ceramic Mating Sleeve | Switzerland, Peru, United States (USA), Saudi Arabia |
Ceramic Fiber Sleeve | Lithuania, Australia, Hungary, Austria |
Ceramic Thermocouple Sleeves | Libya, China, Singapore, Ireland |
Ceramics Head Titanium Sleeve | Serbia, Ecuador, Japan, Ukraine |
Alumina Ceramic Sleeve | Finland, Malaysia, Sri Lanka, France |
Ceramic Coated Pump Sleeve | Chile, Europe, Puerto Rico |
Ceramic Split Sleeve | Zimbabwe, Venezuela, Pakistan, Philippines |
Ceramics Anilox Sleeve | Brazil, Ghana, Spain, Bangladesh |
Ceramic Pipe Sleeve | Denmark, Tibet, India, Argentina |
Ceramics Shaft Sleeve | New Zealand, Macau, Canada, Yemen |
Ceramic Split Mating Sleeve | Gabon, Slovakia, Egypt, United Kingdom |
Ceramic Candle Sleeve | Mongolia, Belarus, Vietnam, Bulgaria |
Braided Ceramic Fiber Sleeve | Greece, Mexico, Norway, Romania |
Braided Ceramic Fiber Sleeve Surface Finish
Surface Finish | Ra 0.1 Microns |
Max Working Temp of Ceramics Tap Sleeve
Max Working Temp | 1600 degree C |
You can compare our price with other Ceramic Sleeve Manufacturers In India, we supply Braided Ceramic Fiber Sleeve, and Ceramic Pipe Sleeve
Ceramics Wire Sleeve Density
Density | 3.65g/cm3 |